Mini QD Loops™ allow users to fasten small cameras to many OP/TECH USA neck straps. They incorporate a thin cord loop for tight camera strap connection areas and 3/8" quick disconnects for easy attachment to strap.
With the OP/TECH USA System Connectors™, the camera/binocular owner has several connection options. You can buy an extra set of connectors to customize the strap to best suit your needs. Straps can be lengthened to be worn across the chest or shortened to be worn at chest level.
Mini QD Loops™ allow users to fasten small cameras to many OP/TECH USA neck straps. They incorporate a thin cord loop for tight camera strap connection areas and 3/8" quick disconnects for easy attachment to strap. They are approximately 2.5" in length when attached to a camera. Contains four connectors (each connector includes one female quick disconnect and one male with loop).
The System Connector™ - Mini QD Loop is small but mighty and perfect for compact cameras! It has a tensile strength of 44lbs which far exceeds the demands of a compact camera.
|Stock #||Mini QD Loops™ Style||Color||MSRP||Approximate Size|
|1301112||1mm||Black||$6.95||Approx. 2.5" (6,4cm) in length when attached to camera|
|1301082||1.5mm||Black||$6.95||Approx. 2.5" (6,4cm) in length when attached to camera|
Recommended Connection Types for direct attachment with the Mini QD Loop
How to Attach a Mini QD Loop to your Camera
1. Thread small cord loop through connection point on camera.
2. Thread mini quick disconnect through opening of loop.
3. Pull mini quick disconnect to tighten knot.
Attaching a Mini QD Loop to camera lugs designed for split rings
Cameras with lugs designed for use with split rings are typically not de-burred as precisely as other connectors; therefore, we recommend using split rings so that there is no risk of damage to the strap from being cut by sharp edges or burrs in the lug.
Do the Mini QD Loops work with the Bino/Cam Harness? I want to use the harness interchangably for cameras and binoculars.
The clips themselves are not the same size and therefor are not interchangeable. The Uni-Loops (of the Bino/Cam Harness) use regular size quick disconnects and the Mini QD Loops use a "mini" quick disconnect. However, you can connect the loop end of the Uni-Loop (from the Bino/Cam Harness) to the open end (the side opposite the loop) of the Mini QD Loops. See the third image above for reference. Then you can use the loop portion of the Mini QD Loops to connect to your camera. The Mini QD Loops are great for cameras/binoculars with small connection areas.