Finally, your medium format and other cameras with retaining lugs can benefit from OP/TECH USA's patented weight reduction system. The Super Pro Strap is available in a choice of two clip designs to better fit the different camera models.
Finally, your medium format and other cameras with retaining lugs can benefit from OP/TECH USA's patented weight reduction system. The Super Pro Strap™ is available in a choice of two clip designs (Version A and Version B) to better fit the different camera models on the market. Please refer to the table below to determine which version is right for your camera.
OP/TECH USA has developed a unique locking slide mechanism which adds extra protection for a secure connection. Once the metal clip is attached to the retaining lug, the plastic locking slide is secured in position behind the metal clip. This prevents the clip from inadvertently opening. The slide must be removed before the clip will open. This innovative design is only available from OP/TECH USA.
Super Pro Connectors are also available separately (without a strap pad.)
|Cameras||Version A||Version B|
|Bronica (ETR and some ETRC)||Available|
|Canon EOS M (Must use supplied locks)||Available|
|Fujifilm GFX 50S||Available|
|Mamiya (except M645 Super and M645 Pro)||Available|
|Olympus IS1 and IS2||Available|
|These are registered trademarks of companies other than OP/TECH USA.
This is only a partial list of the cameras which can use the SUPER PRO STRAP™.
|Super Pro Strap™ version A and B|
|Recommended Load||Up to 15 lbs (6.8kg)|
|Carry Style||Neck, Shoulder|
|# of Connection Points||Two|
|Connection Type||Custom metal clips (Versions A and B)|
|Strap Length||Fully adjustable 37"–46.5" (94cm–118,1cm)|
|Pad Dimensions||2.5" x 15" (6,3cm x 38,1cm)|
|Materials||Neoprene pad with Non-slip Grip™, nylon webbing, elastic and metal clips|
|Made in the USA||Yes|
The recommended load is the weight that is most comfortably carried by a particular strap. It is not the maximum load capacity of the strap.
|Stock #||Super Pro Strap™ Style||Color||MSRP||Approximate Size|
|4201012||Design "A"||Black||$26.95||37"–46.5" (94cm–118,1cm)|
|5401012||Design "B"||Black||$26.95||37"–46.5" (94cm–118,1cm)|
How to Attach a Super Pro Connector to your Camera Watch Video
1. Insert the camera lug through the large hole in the clip which will force the spring clip upward.
2. Slide the clip back which will lock the camera lug in place. The spring clip should close behind the camera lug.
3. Move the retaining slide towards the clip.
4. Lock the retaining slide firmly in place behind the spring clip so that both pieces become one unit.