Reduced Price $6.47 (MSRP: $12.95)
# Factory Seconds - Cosmetic Defect There may be cosmetic defects in the product but they will not affect the performance of the product. There is a limited amount of these products left in stock. Once the stock is sold, they will no longer be available for purchase. Product packaging may or may not be included.
The Compact Sling provides the convenience of a shoulder sling for smaller point-and-shoot style cameras. The nonskid neoprene shoulder pad is secure on the shoulder while the camera freely glides up the strap into shooting position.
OP/TECH USA’s Compact Sling™ provides the unparalleled convenience of a shoulder sling for smaller point-and-shoot style cameras! The low-profile neoprene shoulder pad features a nonskid surface which secures the pad on the shoulder while the camera freely glides up the strap into shooting position. The OP/TECH USA Mini QD Loop™ connector attaches easily to the camera with a 1.5mm cord loop for tight connection areas and a sturdy 3/8” quick disconnect for easy attachment to the strap. The quick disconnect smoothly glides up and down the 3/8” nylon webbing strap to create the sling effect. The length is fully adjustable and has an additional plastic triglide which serves as a stop so that you can adjust where you want the camera to rest in the lowered position.
The Mini QD Loop™ is fully compatible with OP/TECH USA’s Mini Loop Strap™ - QD for a more traditional neck strap as well as the Cam Strap™ - QD wrist strap and the Finger Cuff™ - QD. This added versatility enables your gear to quickly change along with your ever-changing needs. Experience the freedom and convenience of the most versatile strap system on the market today!
|Recommended Load||Up to 2.5 lbs (1.13kg)|
|# of Connection Points||One|
|Connection Type||Mini QD Loop|
|Strap Length||Fully adjustable 24" to 29" in length (61cm - 73,7cm)|
|Pad Dimensions||1.3" by 14" Neoprene (3,3cm - 35,5cm)|
|Quick Disconnects||Yes, 3/8" mini quick disconnect|
|Materials||Neoprene pad with Non-skid surface, nylon webbing and leather tabs|
|Made in the USA||Yes|
The recommended load is the weight that is most comfortably carried by a particular strap. It is not the maximum load capacity of the strap.
The Compact Sling is measured from the top of the shoulder to the end of the connector.
One Mini QD Loop connector is sufficient for supporting a camera. It has a static weight support of up to 44 pounds.
Recommended Connection Types for direct attachment with the Mini QD Loop
How to Attach a Mini QD Loop to your Camera
1. Thread small cord loop through connection point on camera.
2. Thread mini quick disconnect through opening of loop.
3. Pull mini quick disconnect to tighten knot.
Attaching a Mini QD Loop to camera lugs designed for split rings
Cameras with lugs designed for use with split rings are typically not de-burred as precisely as other connectors; therefore, we recommend using split rings so that there is no risk of damage to the strap from being cut by sharp edges or burrs in the lug.
Is it possible to unthread the strap on the Compact Sling in order to remove and/or replace the triglide or quick disconnect?
No, it is not possible to unthread the strap on the Compact Sling. The ends of the webbing are sewn directly to the strap pad. In order to remove the quick disconnect, you would need to cut the webbing and then re-sew it.