The Pro Loop Connector uses 1/4" tubular nylon webbing to fit easily in tight connection areas on cameras. It is interchangeable with many OP/TECH USA camera straps.
With the OP/TECH USA System Connectors™, the camera/binocular owner has several connection options. You can buy an extra set of connectors to customize the strap to best suit your needs. Straps can be lengthened to be worn across the chest or shortened to be worn at chest level. Another feature of the System Connectors™ is the small carrying handle created when the quick disconnects are latched together.
The Pro Loop Connector™ uses 1/4" tubular nylon webbing to fit easily in tight connection areas. The Pro Loop Connector™ is available in sets of two, with one female and one male connection.
|1301372||Pro Loop Connector™||Black|
|1301382||Pro Loop Connector™ XL||Black|
How to Attach a Pro Loop™ Connector to your Camera
The Pro Loop Connector™ uses 1/4" tubular nylon webbing to fit easily in tight connection areas. It attaches to the connection point of a camera the same way the Uni-Loop Connector™ does.
1. Detach the connection system from the strap at the quick disconnects. Slide the loop end of the Pro Loop Strap™ through the connection point of the camera.
2. Then pass the other end of the Pro Loop Strap™ through the loop.
3. Pull the connection system tight to form a secure hold. Re-attach the connection system to the strap.
What is the width of the strap used in the connectors? I mean the main strap between the quick disconnect and the Pro Loop?
The webbing is 3/4" wide on the Pro Loop Connector.