Find the right products for your gear.

This product is made in the USA
Made in USA

Reporter Strap™

Availability: In stock

MSRP $24.95

  • Comfortably and safely carries two cameras or a camera/binocular combination
  • Secondary strap is completely detachable
  • Weight reduction system for added support
  • Fully adjustable in length: Primary strap approx. 24" - 51", Secondary strap approx. 31" - 35"
  • Stays in place with our Non Slip Grip™
  • Made in the USA

The Reporter Strap™ addresses the needs of today's active photographers who use two cameras to cover the diverse photo challenges presented in their work. Now two cameras or a camera/binocular combination can be comfortably worn with only one strap - the Reporter Strap™ . This allows you to have better control of your gear while reducing the chance of damaging expensive equipment.

The Reporter Strap™ has quick disconnects on the primary strap so that using different connectors is a snap. The popular OP/TECH USA 3/8" System Connectors™ are standard on the primary strap. The secondary strap attaches to the main strap body with durable plastic clamps similar to the Reporter/Backpack System Connectors™ . It features the exclusive OP/TECH USA Uni-Loop System Connectors™ which are compatible with numerous OP/TECH USA neck straps, hand straps, and harnesses. Top quality neoprene reinforced with durable elastic makes the equipment feel like half the weight. The Reporter Strap™ is also great for wildlife photographers carrying both a camera and binoculars. When in the field for long periods of time, OP/TECH USA's weight reduction comfort can make all the difference.

Reporter Strap™
Reporter Strap™
Images   mouse over the squares

Product Video

3/8 Webbing
3/8 Webbing

Reporter Strap™

 Reporter Strap™
Recommended LoadUp to 15 lbs (6.8kg)
Carry StyleNeck, Shoulder
# of Connection PointsFour
Connection TypeTwo 3/8" Webbing connectors on Primary Strap and two Uni Loop Connectors™ on Secondary Strap
Strap LengthPrimary strap is adjustable 24" to 51" (61cm - 129,5cm) and Secondary strap is adjustable 31" to 35" (78,7cm - 88,9cm)
Pad Dimensions2.5" (at widest) by 15" Neoprene (6,35cm - 38,1cm)
Quick DisconnectsYes (on Primary and Secondary)
MaterialsNeoprene pad with durable elastic and Non Slip Grip™, nylon webbing
Webbing Width1"
Made in the USAYes

The recommended load is the weight that is most comfortably carried by a particular strap. It is not the maximum load capacity of the strap.

Stock NumberStyleApproximate SizeColor
6501011Reporter Strap™Primary Strap approx. 24" - 51" (61cm - 129,5cm) Secondary Strap approx. 31" - 35" (78,7cm - 88,9cm)Black
6502011Reporter Strap™Primary Strap approx. 24" - 51" (61cm - 129,5cm) Secondary Strap approx. 31" - 35" (78,7cm - 88,9cm)Red
6503011Reporter Strap™Primary Strap approx. 24" - 51" (61cm - 129,5cm) Secondary Strap approx. 31" - 35" (78,7cm - 88,9cm)Navy
6511011Reporter Strap™Primary Strap approx. 24" - 51" (61cm - 129,5cm) Secondary Strap approx. 31" - 35" (78,7cm - 88,9cm)Steel
How to Attach a 3/8" Webbing Connector to your Camera (Primary strap)

Webbing Connector

1. Pass the end of the webbing through the connector on the camera.2. Pass it back through the first opening on the plastic buckle.3. Pass it through the second opening on the plastic buckle.4. Pull tight for a secure hold.


How to Attach a Uni Loop Connector™ to your Camera (Secondary strap)

Uni Loop attachment

1. Thread Uni Loop™ through connection point on camera.2. Thread quick disconnect through opening of Uni Loop™.3. Pull quick disconnect to tighten knot.

Write Your Own Review

You're reviewing: Reporter Strap™

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Construction Quality

* Required Fields

I could not thread the 'Uni Loop" through the camera connection point on the Secondary Strap like it shows on the picture. Is there a trick to it? My problem is the "Uni Loop" is too thick and stiff to work through the connection point. HELP!! :)

There is a little trick for getting the Uni Loop through really tight connection areas on cameras. Take a piece of thread and loop it through the Uni Loop. Then pull the thread through the connection area on your camera. By pulling on the thread you should be able to pull the Uni Loop through the connection area.
If this doesn't work you can also try using a round metal key ring. Get one small enough that will loop through the connection area of your camera and then attach the Uni Loop to the key ring.


Ask OP/TECH USA a Question

* Required Fields

We will email a response to your question as soon as possible.

You may also be interested in the following products:



MSRP: $7.95-$179.00
Pro Strap™ and Pro Loop Strap™

Pro Strap™ and Pro Loop Strap™

MSRP: $21.95-$22.75
Dual Harness™

Dual Harness™

MSRP: $55.95
Soft Pouch™ - Digital D-Series

Soft Pouch™ - Digital D-Series

MSRP: $19.95-$45.95
Media Keeper™

Media Keeper™

MSRP: $9.95

This is a partial list of online dealers that sell the Reporter Strap™ on their website. For a more complete list of stocking dealers, please visit Where to Buy - USA.

Please note that these links will take you off the OP/TECH USA website. OP/TECH USA does not control, approve or endorse these dealer websites. These links are provided for your convenience and OP/TECH USA is not responsible for the content or privacy practices of these dealer websites.

It's always best to support your local dealer. We understand that this may not always be an option due to time restraints or location; therefore, we're always happy to take your factory-direct order. We ship throughout the USA and Canada. For shipments to other countries please locate one of our International Distributors.