Uses Mini QD Loop™ for small camera connection area
Compatible with other OP/TECH USA straps
Made in the USA
OP/TECH USA’s Compact Sling™ provides the unparalleled convenience of a shoulder sling for smaller point-and-shoot style cameras! The low-profile neoprene shoulder pad features a nonskid surface which secures the pad on the shoulder while the camera freely glides up the strap into shooting position. The OP/TECH USA Mini QD Loop™ connector attaches easily to the camera with a 1.5mm cord loop for tight connection areas and a sturdy 3/8” quick disconnect for easy attachment to the strap. The quick disconnect smoothly glides up and down the 3/8” nylon webbing strap to create the sling effect. The length is fully adjustable and has an additional plastic triglide which serves as a stop so that you can adjust where you want the camera to rest in the lowered position.
The Mini QD Loop™ is fully compatible with OP/TECH USA’s Mini Loop Strap™ - QD for a more traditional neck strap as well as the Cam Strap™ - QD wrist strap and the Finger Cuff™ - QD. This added versatility enables your gear to quickly change along with your ever-changing needs. Experience the freedom and convenience of the most versatile strap system on the market today!
Fully adjustable 24" to 29" in length (61cm - 73,7cm)
1.3" by 14" Neoprene (3,3cm - 35,5cm)
Yes, 3/8" mini quick disconnect with 1.5mm cord loop
Neoprene pad with Non-skid surface, nylon webbing and leather tabs
Made in the USA
The recommended load is the weight that is most comfortably carried by a particular strap. It is not the maximum load capacity of the strap. The Compact Sling™ is measured from the top of the shoulder to the end of the connector. One Mini QD Loop™ connector is sufficient for supporting a camera. It has a static weight support of up to 44 pounds.
fully adjustable 24" to 29" in length (61cm - 73,7cm)
The Compact Sling™ is measured from the top of the shoulder to the end of the connector.
How to Attach a Mini QD Loop™ to your Camera
1. Thread small cord loop through connection point on camera.
2. Thread quick disconnect through opening of loop.
3. Pull quick disconnect to tighten knot.
A great strap for hiking with a mirrorless camera, though still a bit floppy review by MM on 1/1/2014
This is exactly the right strap/sling for my Sony NEX 6. I appreciate the quality construction and it's clear that the Mini QD loop is plenty strong enough to hold the NEX 6, even with the 55-210 zoom lens attached. It still swings a bit when hiking - perhaps another QD loop on the other connection point might help stabilize it. But in general, I am very pleased with this piece of equipment.
Fantastic! review by Larry on 5/27/2013
This is the best way to carry a Sony NEX or similar mirrorless camera.