Look for the flag - for products proudly made in the USA!
Filter Cap™
Availability: In stock
MSRP $7.95
- Protects the lens/filter from dust, moisture or impact
- Held in place by the filter of your choice
- Additional filters can be added without having to remove the Filter Cap™
- Avoids vignetting caused by the cap
- Available Sizes: 49mm, 52mm, 55mm, 58mm, 62mm and 67mm
Finally there is a way to stack a filter without having to remove the lens cover. Filter Cap™ is held in place by the filter of your choice. As it's positioned behind the filter, it enables other filters to be stacked on top without causing any vignetting. Filter Cap™ effectively blocks out dust and moisture. It also provides impact protection to the rim of the filter and lens which is often a common problem amongst avid photographers. This is truly a unique product.
Available Sizes
49mm, 52mm, 55mm, 58mm, 62mm and 67mm
Available Colors
Black
- Specifications
- Stock Numbers
- Instructions
- Customer Reviews
- Q & A
- Related Products
- Buy from a Dealer
- Buy from
Filter Cap™
- Available Sizes: 49mm, 52mm, 55mm, 58mm, 62mm and 67mm
- Water and dust-tight seal
- Avoids vignetting
- Materials: Hard plastic
| Stock Number | Style | Approximate Size | Colors |
|---|---|---|---|
| 0701491 | Filter Cap™ - 49mm | 49mm | Black |
| 0701521 | Filter Cap™ - 52mm | 52mm | Black |
| 0701551 | Filter Cap™ - 55mm | 55mm | Black |
| 0701581 | Filter Cap™ - 58mm | 58mm | Black |
| 0701621 | Filter Cap™ - 62mm | 62mm | Black |
| 0701671 | Filter Cap™ - 67mm | 67mm | Black |
1. Open the Filter Cap™.
2. Set the open ring of the Filter Cap™ against the camera lens in the direction that will enable the lid to close correctly.
3. While holding the Filter Cap™, thread the filter of your choice to your lens. Once your filter is firmly attached, the Filter Cap™ should be held securely between your lens and filter. This will enable you to attach an additional filter without having to remove the Filter Cap™.
Note: the Filter Cap™ lid will usually only close over one filter.
Customer Reviews
- Excellent !! review by michael salmon
-
I have used one on my 72mm lens for 3 years. I am so happy with it. If you keep the filter not quite fully tightened, you can rotate it to use to block a stray light stream instead of a hood. I just went to buy one for my new 72mm lens and am very disturbed it is no longer in production any more in the 72mm size. So I took it off of my old 72mm and put it on my new 72mm. The poor soul that buys my old lens will have to use a "cap with a string" !Functionality Construction Quality Comfort Durability Value
FROM OP/TECH USA:
Your wish is our command!
Check out our new Fast Cap with Metal Ring that is available in the following sizes: 49mm, 52mm, 55mm, 58mm, 62mm, 67mm and 72mm. (posted on 12/13/10) - great product review by michael salmon
-
i have been a photographer since 1972. This is a great product. My only disappointment is that the 72 mm seems to be no longer available, and this is a standard Canon lens size! (posted on 12/5/10)Functionality Construction Quality Comfort Durability Value
Question:
I have the new Sony Cybershot DSC-HX100V Digital Camera. It has a fixed lens with no threads on the lens to attach a filter. How does your Filter Cap attach to my specific camera?
Answer:
The Filter Cap only works with cameras that have threads.
You may also be interested in the following products:
Hood Hat™
MSRP: $7.50-$14.25
|
Fast Cap™
MSRP: $7.95
|
Snoot Boot™
MSRP: $13.95-$16.95
|
Lens Mount Cap
MSRP: $9.95-$17.95
|
Lens Sleeve™
MSRP: $8.95-$10.95
|
This is a partial list of online dealers that sell the Filter Cap™ on their website. For a more complete list of stocking dealers, please visit Where to Buy - USA.
Please note that these links will take you off the OP/TECH USA website. OP/TECH USA does not control, approve or endorse these dealer websites. These links are provided for your convenience and OP/TECH USA is not responsible for the content or privacy practices of these dealer websites.
